JUST A SIMPLE CHAIN AND SPROCKET DRIVE
ROTO-MIX VXT 325 & 425 MODELS OFFER TWIN SCREWS
Fresh Fluff - This means big nutritional advantages for lower cost of gain or increased
milk production. ROTO-MIX consistently produces premium quality feed by lifting the
ingredients past the lower auger's wedge point, resulting in a fresher, fluffier ration that
insures increased consumption.
More Leaf - The gentle tumbling action with the ROTO-MIX system mixes fragile
ingredients, such as hay leaves, flakes, and high-moisture grain, without causing
excessive damage. More leaf in the mix means more protein to your herd.
Total Mixed Rations - Our thorough mixing action eliminates dead spots and corner
pile-up giving you a consistent balance of nutrients from the first pound of feed to the last.
The ROTO-MIX Hay Processor keeps the hay out of the mixing chamber until the knives on
the top auger separate...not beat...the hay. The result is hay, with leaves intact and
distributed evenly into the mix, resulting in fewer incidents of acidosis.
More Nutritious Conventional auger mixers crush, grind and mash all ingredients, which
create more fines in the bunk... a waste of your feeding dollars. The ROTO-MIX tumbling
action mixes all ingredients, even fragile and flaked, without excessive breakage.
Fines With the ROTO-MIX mixing system there's less grinding of flaked, and high moisture
grain, pellets or other ingredients so you'll have less fines in the, bunk which means less
wasted feed... giving you the most for your feed dollars.
Shrinkage Our unique ability to process baled hay, as you need it results in less wind
shrinkage when loading and processing. You'll get the most out of your feed ingredients.
The thorough mix provided by ROTO-MIX eliminates unpleasant tastes associated with
certain supplements, allowing you more options when choosing feed supplements.
Floating Lower Auger
Floating lower auger available with hay processor option relieves pressure when wet or
grassy chunks of hay are inadvertently loaded into the mixer.
The flared side allows feed to tumble out of the rotor speeding up the mixing action and
reducing the chance for feed to get trapped inside the rotor.
The forward pitch rotor design, adjustable UHMW wiper blades, and the rotation of the
lower auger quickly and efficiently clean-out the mixing chamber.
Adding hay to the ration is easy and convenient. Place the hay in the Hay Processor on the
unit and let it do the work of separating the hay and distribute the long stemmed material
into your mix. The result is hay, with leaves intact and the stem not continually cut up or
Patented Double Flighted Top Auger
Helps to hold the hay in the processor to be separated and eliminates "hay balls" from
slipping in-between the flights and into the mixing chamber.
Easy Access Doors
The single lever latch makes inspection easy and desirable compared to other little
latches or hardware.
Single Point Grease Bank
Allows quick lubrication from a single point. Heavy-duty drive assembly runs in an
enclosed oil bath.
Lower Center of Gravity
A lower center of gravity makes for a more stable unit when feeding and less shock load
Single pole tongue allows for a tight turning radius.
Trailer constructed of heavy-duty tubular steel with built in scale mountings.
Heavy-duty hubs and spindles designed for years of trouble free operation. A wide
selection of tire choices.
Rear bumper is standard equipment.
Short wheelbase allows for tight turns and easy maneuverability.
Adjustable hitch device allows the operator to level mixer with most tractors to maximize
Heavy-duty, tubular trailer frame ensures long life and maximum scale accuracy.
Weigh bar scale or load-cell mounting.
Load cell mounting comes standard with Roto-Mix ball and socket type tie bars to connect
the mixer to the frame. This feature eliminates side and end movement on the load cells,
which allows for scale dependability and accuracy.
Higher side discharge location allows easier loading of conveyors or elevator legs while
maintaining a minimum mixer height.
Left and right discharge units available.
Low electric horsepower requirements.
Flexible motor mount designs to keep overall space requirements to a minimum. Wide
base scale frame.
Door- Wide door openings allow for fast feed delivery with easy hydraulic control while
mixer is running.
Spouts- Gravity discharge spouts have no moving parts. Wind exposure is reduced
compared to other units throwing feed to the cattle.
Magnets- Trap foreign metal before it reaches the feed bunk.
Ladders to aid in inspection of mixing chamber.
Stainless steel liners for mixing chamber.
Rotor options of 3, 5, and 6 bar to match the your ration density and improve mixing speed
|1483 Old Summersville Road
Campbellsville, KY 42718